ECHO GINA 24 / 96 - Breakout Box Only - No PCI Card

This Echo Gina 24/96 is an audio interface which operates with a PCI card, (not included in this listing.) It gives you 2 balanced analog inputs and 8 balanced analog outputs via 1/4 TRS jacks on the front panel. It supports up to 96kHz sample rates with 24-bit resolution throughout, including ADAT optical I/O for 8 channels and S/PDIF coaxial or optical digital I/O. There's a headphone output with its own volume knob monitoring outputs 1/2, plus Esync for syncing multiple Echo units and onboard DSP for low-latency monitoring.

Analog inputs handle +4dBu nominal with trim controls and meters, maxing at +18dBu, while outputs match that spec. Frequency response is flat from 10Hz to 22kHz, with dynamic range around 108-112dB A-weighted on inputs and 110-115dB on outputs, and very low THD. It uses a PCI bus-master card connected via a custom shielded cable to the box. The card and cable are not included.

Works with older Windows and Mac systems via PCI slot. Solid for multitrack recording or routing stems to a mixer, with ASIO drivers for low latency like 3-4ms back in the day.

Specifications

• Analog inputs: 2 balanced TRS, +4dBu nominal, +18dBu max, 10k ohm impedance
• Analog outputs: 8 balanced TRS, +4dBu nominal, +18dBu max
• Frequency response: 10Hz–22kHz ±0.5dB
• Dynamic range: 112dB A-weighted inputs, 115dB A-weighted outputs
• THD+n: <0.001% inputs, <0.002% outputs (20Hz–22kHz)
• Sample rates: up to 96kHz, 24-bit resolution

Condition
This item has not been tested, as I do not have the PCI cards, but is guaranteed to be in good working condition. It does not come with original packaging. No power supply included.